Sign on bonus of $1000, for any candidate who stays on board for a minimum of 6 months!

Job Duties:

+ Sets up and operates conventional, special-purpose, and numerical control machines and machining centers to fabricate metallic and nonmetallic parts, and fits and assembles machined parts into complete units, applying knowledge of machine shop theory and procedures, shop mathematics, maintainability of materials, and layout techniques

+ Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements

+ Measures, marks, and scribes dimensions and reference points on materials or work piece as guides for subsequent machining

+ Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines, such as mills, lathes, jig bores, grinders, and shapers

+ Calculates and sets controls to regulate machining factors, such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media

+ Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required

+ Verifies conformance of finished work piece to specifications, using precision measuring instruments

+ Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data

+ Fits and assembles parts into complete assembly, using jigs, fixtures, surface plate, surface table, hand tools, and power tools

+ Verifies dimensions and alignment of assembly, using measuring instruments, such as micrometers, height gauges, and gauge blocks

+ Installs machined replacement parts in mechanisms, machines, and equipment, and test operation of unit to ensure functionality and performance

+ Confers with engineers, production personnel, programmers, or others to resolve machining or assembly problems

+ Communicates with co-workers and supervisor to receive instructions and coordinate activities

Job Competencies:

+ Demonstrates safety compliance by adhering to all Noranco safety policies including: reporting all safety incidents and near misses and notifying leadership of any unsafe working conditions

+ Actively wears all appropriate personal protective equipment (PPE) while completing work tasks on the shop floor.

+ Champions department safety initiatives through 6S and safety planning.

*Must be a U.S. Citizen or Permanent Resident Green Card Holder

**Requisition ID:** 174865.2

Business Profile:

PCC Aerostructures is a leading supplier of complex components and assemblies to the global aerospace industry.

PCC Aerostructures now includes more than 35 plants in North America, Mexico, Europe and Asia with over 5500 employees and has ambitious growth plans. Businesses within PCC Aerostructures include Primus International, SPS Aerostructures, Centra, Avibank and AVK, Klune, ProCoat, Southwest United Industries, Progressive Incorporated, Synchronous, and Kalistrut. Plants locations include Washington, Utah, California, Oklahoma, Kansas, Texas, Ohio, Arizona, Canada, Mexico, the UK and China.

Location Profile:

The Noranco Deer Valley and Jet Processing facilities were recently acquired by PCC and provide high precision machined and fabricated components to the commercial and aerospace industry along with anodizing, passivation and other surface treatments. Aircraft platforms currently include the Boeing 737, Airbus A380, Lockheed Martin F-35 and Gulfstream E650. Combined annual sales revenue is in excess of $40 million and growing.

Position Summary:

The Machinist is responsible for the setup and operation of vertical, horizontal 3-5 axis CNC machining centers. The Machinist reports directly to the Production Manager and does not have any direct reports.

Offering a $1000.00 Sign-On Bonus! Must be here for at least 6 months, or the bonus will be taken off your final check!

Primary Duties & Responsibilities:

+ Setup of machines through use of proper tools, and the most efficient technique. Align vises, fixtures with indicator to be parallel or square to a reference surface. Indicate position of the fixture and parts. Set axis to correct position by using the right numeric code. Load and unload the program.

+ Participate in the update and maintenance of set up sheets for all parts through the work center.

+ Operate machine with proper guarding in place, report any damaged guarding, tool holders, tools etc. Ensure guards are replaced after set-up. Monitor oil levels of machine; keep machine and tools in condition.

+ Check the first part and make sure that all the dimensions are within tolerance and submit part(s) to inspection for buy off.

Soft Skills:

+ Dedication to accuracy, being organized, and desires to be held accountable for functional area.

+ Communicate effectively: Ability to express yourself clearly (orally, written, electronic, and non-verbal) and to be a good listener. Ability to work Co-operatively with others, maintain a positive attitude and promote the company’s best interests.

+ Commit to the job: honesty, dependability, and enthusiasm.

+ Ability to learn new tasks and willingness to take on new tasks.

+ Accept responsibility: Take pride in the quality of your work, evaluate it regularly, and effective use of time.

+ The ability & willingness to adapt & be flexible to an ever-changing growth environment.

+ Demonstrate persistence, self-motivation, and display and effort to continually improve performance.

+ Ability to use all the available measuring tools such as micrometer, dial gauges, depth micrometer, measuring block, and height gauges

+ Ability to create layouts, read and interpret blue prints and drawings

+ Full understanding of geometric tolerances

+ Ability to identify wear of cutting tools (inserts, drills, end mills, boring bars, etc.)

+ Ability to change and set cutting tools

+ Experience in the aerospace industry an asset

+ Basic computer skills are an asset; Fanuc, Yasnac, Haas control knowledge is a must.

+ Change and modify programs where applicable.

+ Change tool length and diameter offsets, fixture and pallet offsets.

+ Modify and grind cutting tools as required, and use proper feed and speed for maximum efficiency.

+ Keep production running; deburr and prep parts for loading, or clean parts to reload.

+ Check parts, deburr, tapping, counter boring and cleaning up tools holders from the previous setup.

+ Prepare tools and fixtures for the next job, get new tools, use regrind tools as required. Make sure to plan ahead when special tools may be required.

+ Follow Health and Safety Policies and practice safe work habits, industrial hygiene and good housekeeping around benches and machines.

+ Identify opportunities for improvement via new tooling, set up reduction concepts and programming changes to improve cost and delivery

+ Participate in root cause and corrective action identification for inferior quality parts.

+ All other duties as assigned

**Requisition ID:** N00299

**Description:**

1. Read a blue print for a part

2. detail the lathe and mill operations into steps

3. draw a "sketch" used by the Machinists in Solidworks

**Skills:**

CNC Programming, Solidworks, Master CAM/Gibbs CAM, Machining, Lathe & Mill

**Top Skills Details:**

Experience with INCONEL/Nickel Alloy/Stainless Steel/Titanium

draw sketches in solidworks

read part prints/ blueprints

Gibbs CAM and Master CAM experience preferred

**Additional Skills & Qualifications:**

Bachelor's Degree Engineering or Related Work Experience- can substitute exp for degree

**Experience Level:**

Intermediate Level

**About Aerotek:**

We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity. As a Best of Staffing® Client and Talent leader, Aerotek's people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees. Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. With more than 250 non-franchised offices, Aerotek's 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year. Aerotek is an Allegis Group company, the global leader in talent solutions. Learn more at Aerotek.com.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

**Machinist \(Grind\)**

**Description**

** JOB SUMMARY: **

Run, set up and edit jobs on manual and CNC machines such as Lathes, Mills, Grinders and Hone Machines\. Will be responsible for the use of general to advance hand\-measuring tools daily\. Working closely with teams from all areas of the Machine Shop, to help assist in the development and troubleshooting of jobs and projects\.

** JOB RESPONSIBILITIES **

99. I\. Set up manual and CNC equipment, ability to prove out and edit some programs

99. Change cutting tools and adjust machine feeds and speeds for optimal efficiency

99. Assist with editing of G and M codes on the machines

99. Identify, organize, estimate, and recognize differences or similarities with excellent attention to detail\.

99. Set\-up and run jobs to include fixturing, open set\-ups and trouble\-shoot set\-ups and be able to

99. Resolve problems by making decisions to correct geometric constraints\.

99. Assist in equipment set up to help eliminate non\-conformance and spindle down time\.

99. Perform part inspection and in process inspections

99. Setup inspection tools, including but not limited to: Micrometers, gage blocks\. Bore gauges

99. Identify and implement opportunities for process improvement and increased efficiency

99. Maintain basic equipment and work area on a daily basis in a clean and orderly condition\.

99. May help quote jobs with the understanding of time management and the jobs being quoted

99. Perform daily 5S duties

**Qualifications**

** EDUCATION: **

+ High School education or equivalent is required\.

+ Technical education is preferred

** EXPERIENCE: **

+ Exposure to ID/OD Grinding, Manual and CNC Milling and Manual and CNC Lathe experience is preferred

+ Aerospace, Okuma, Haas, Matsuura, Centroid, Hermle and Fryer experience is preferred \(Lathe and Mill\)

+ Kellenberger, Studer, Moore Jig Grinder, Sunnen Hone and Fryer experience preferred \(Grind\)

** QUALIFICATIONS: **

+ Ability to perform basic math skills efficiently and accurately

+ Knowledge of manufacturing processes related to aerospace industry

+ Blueprint reading, knowledge of GD&T, basic machine operation “Button Pusher,” to Machining and knowledge of cutting tools is preferred

+ Strong written and verbal communication skills\.

+ Ability to adapt to change and stressful situations\.

+ Willingness to take on responsibilities and challenges\.

+ Strong attention to detail

+ Proficient in computer applications; including Microsoft Word

**EEO Statement**

Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of, race, color, religion, gender, age, national origin, military status, veteran status, handicap, physical or mental disability, sexual orientation, gender identity, genetic information or any other characteristic protected by law\.

**Pay Transparency Policy Statement**

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant\. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise, have access to compensation information, unless the disclosure is \(a\) in response to a formal complaint or charge, \(b\) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or \(c\) consistent with the contractor’s legal duty to furnish information\.

**Job** Manufacturing

**Primary Location** US\-Arizona\-Mesa

**Recruiting Company** ABLE

**Schedule** Full\-time

**Job Level** Individual Contributor

**Shift** First Shift

**Req ID:** 289236

Summary:

Sets up and operates various conventional and/or numerically controlled machining centers on the

most complex and difficult jobs. Works from blueprints, sketches, planning sheets, verbal

instructions, and/or engineering, tooling, or equipment information. Contributes to lean

initiatives to increase productivity and reduce costs. Works independently with minimum guidance in

a team environment.

Essential Duties and Responsibilities:

• Runs multiple machines efficiently, which may require simultaneous operations. Adapts or

improvises tooling to accomplish results where operations require a broad knowledge of production

machining technology, operating skills, and shop techniques together with diversified experience.

• Sets ups, adjusts, and operates a variety of conventional and/or special purpose 5 axis

machines to perform the most diversified and difficult production operations on work having close

and exact tolerances, several dimensional relationships, unusual contours, dimensional and finish

requirements.

• Interprets customer requirements from blueprints, complex drawings, engineering

specifications, quality directives, charts, tables, sketches, and verbal instructions.

• Interfaces with engineering to resolve drawing errors, suggest design changes, and solve

product/process problems.

• Implements manufacturing methods using standard production machines, materials, and tooling.

May advise and assist with tooling design.

• Makes complex setups, which may include multiple work piece stations, utilizing custom and

standard holding devices.

• Develops and defines processes with limited documentation, as required.

• Trouble shoots and resolves machining problems.

• Responsible for machining and checking parts to maintain a high level of quality and

efficiency.

• Inspects finished parts for conformance to specifications by visual examination, and utilizes

precision measuring instruments such as gages, calipers, micrometers, comparators, and surface

plate techniques. May be required to use coordinate measuring machine (CMM). Ensures equipment is

calibrated in accordance with schedule.

• Routinely maintains equipment to ensure cleanliness, accuracy, and reliability specific to

division requirements.

• Accurately and regularly performs statistical process control (SPC) specific to division

requirements.

• Uses advanced shop mathematics, which may include trigonometry, and general knowledge of metal

characteristics and other processing requirements.

• Actively contributes to lean initiatives by identifying and providing suggestions on areas for

improvement. Effectively applies lean concepts and tools in work area.

• Provides guidance or assistance in coordinating workload priorities to make appropriate

accommodations based on business demand.

• Observes all company policies and procedures, including safety rules, and maintains a clean

and orderly work area.

• Trains and mentors less experienced team members. 18. Performs other related responsibilities,

as requested

Education, Training, Skills and Experience Requirements:

• Five or more years of directly related machining experience in a high technology manufacturing

environment. Able to work with minimum supervisory guidance.

• Handles multiple tasks with changing priorities to meet customer needs.

• May require specialize certification specific to division requirements (i.e. certified

operator).

• Reads, understands, and follows blueprints, complex drawings, engineering specifications, and

informal written or verbal instructions.

• Able to make and evaluate precision machine set ups.

• Has working knowledge of advanced shop mathematics, may include trigonometry.

• Able to implement lean initiatives.

• Demonstrates effective verbal, written, and interpersonal communication skills, as well as the

ability to work in a team environment on research and solution development.

• Possesses effective mentoring and training skills, and ability to service as a resource to

other team members.

• Interprets reports and uses job specific software applications. Able to use employee

self-service systems to access on-line information and use specialized automated systems (i.e. PMR,

TORS, e-mail).

• Effectively demonstrates team member competencies and participates in goal setting,

performance feedback, and self-development activities.

Physical Demands:

While performing the duties of this job, the team member is required to walk, stand, and sit for

extended periods of time. The team member is required to demonstrate manual dexterity and use hands

to operate machinery. Specific vision abilities required by this job include close vision. Also

expected of the team member is regular attendance, and the ability to work cooperatively and

professionally with others. May be required to lift up to 50 lbs.

(The essential functions have been provided as examples of types of work performed by team members

assigned to this job classification. The Company reserves the right to modify work assignments

and/or to make reasonable accommodations so that qualified team members can perform the essential

functions of the job. The physical and mental demands described above are representative of those

required to successfully perform the essential functions of this job.)

This position requires access to information, or technology, which is subject to the International

Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of

ITAR. ITAR defines a U.S. person as a (i) citizen or national of the United States; or (ii) a

lawful

Holder”); or (iii) a person admitted to gee, or granted asylum, as specified under applicable law.

Machinist I **INTERNAL APPLICANTS ONLY**

Job Code:2021:0402-020

Location:Yuma Proving Ground, AZ

FT/PT Status:Full Time

Business Sector:Test Range Operations

Job Description

Machines / fabricates prototype and replacement parts for equipment, machines and weapon systems of various types and alloys. Makes repairs to machinery, mechanical equipment and/or optical equipment. Interprets verbal and written instructions and specifications; planning and laying out of work. Using a variety of machinist's hand tools and precision measuring instruments; sets up and operates manual and CNC machine tools; machines and shapes metal parts to close tolerances; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining. Demonstrates knowledge of the working properties of common metals. Selects standard materials, parts, and equipment required for this work; and fitting and assembling parts into mechanical equipment and machines; and making all necessary adjustments to complete repairs. Provides iterative feedback to customers. Shares work progress and information with fellow machinists. Performs other duties as required to complete the assigned mission. This position is covered under the Collective Bargaining Agreement.

Qualifications

Pay Rate: $26.68Education/Licenses/Certifications/Experience Requirements:• Must possess a high school diploma or equivalent.• Must have one of the following, Machinist Technical school degree/certificate, or applicable military training or 2 years’ experience working in a machine shop environment with CNC machines. • Must have work experience operating and using precision measuring instruments common to the trade. Job Skills Requirements: • Must have the ability and understanding to read blueprints and interpret complex multi-view drawings.• Must have experience operating manual and CNC mills and lathes. Physical Requirements:• Must pass a pre-employment drug screening and physical and periodic retests.• Must be able to wear appropriate Personal Protective Equipment (PPE) for work tasks assigned.• Must be capable of working in extreme weather conditions including summer temperatures peaking around 120 degrees Fahrenheit.• Must be capable of lifting 100lbs unassisted.• Must be capable of working in outdoor weather conditions.• Must be capable of frequent squatting, crouching, and stooping.• Must be capable of kneeling, bending and standing while performing maintenance machinist duties.• Must meet the physical requirements necessary to perform operations outlined, performed, and stated in the SOPs for Welding, ELMO and Transducers Departments.Job Requirements:• Must be able speak, write, read, and understand English.• Must have a well-mannered customer service attitude.• Must be willing to cross-train in other areas.• Must be able and willing to work overtime when required.• Must use “down-time” effectively to the benefit of test, self, and company.• Must be punctual, responsible, and dependable.• Must demonstrate motivation, initiative, and reliability.• Must be adaptable, flexible, and able to adjust to new or changing instructions.• Must have a demonstrated ability to follow instructions and company policy.• Must be able to deliver quality products to the customer and be responsive to their needs.• Must be safety and security conscious, complying with rules and policies.• Must be able to work both as part of a team and independently.• Must be able to work all shifts, weekends, holidays and overtime as needed, sometimes on short notice, to support test missions.• Must possess a valid driver's license, without special restrictions.• Must have dependable transportation and a dependable means of communication.Additional Desirable Qualifications:• Knowledge and the ability to heat treat alloys to customer specifications.• Experience using Rockwell hardness tester and a computer numerical control equipment.• CNC programming skills using MasterCam or other programing software.Terms of Employment & Eligibility Requirements:• Must be a U.S. Citizen and not hold multiple citizenships.• Must possess or be able to obtain a security clearance prior to employment and maintain security clearance for the duration of employment.• Must be a current TRAX employee or affiliate subcontractor for internal postings.***Relevance of experience to be determined by hiring manager.Closing Date: February 3, 2021

Other Job Information (if applicable)

•TRAX International, Test Services Division, participates in E-Verify.•TRAX is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability.•TRAX Test Services promotes a drug/alcohol free work environment through the use of mandatory pre-employment drug testing and on-going random drug testing, as per applicable State Laws.•Must be able to obtain a security clearance prior to employment and maintain security clearance for the duration of employment.

TRAX Test Services also encompasses affiliate subcontracts. All positions with TRAX can always be transferred to one of the subcontracts.

CNC Machine Operator

+ Jobs

+ Login

+ 16-Jan-2021 to 15-Apr-2021 (MST)

+ Steel Girder

+ Coolidge, AZ, USA

+ DOE

+ Hourly

+ Full Time

Paid Time Off, Profit Sharing, 401k, Medical, Dental, Vision, Life Insurance, Flexible Spending Accounts, Accident & Critical Illness Insurance, Short & Long Term Disability, Identity Theft Protection

Email Me Similar Jobs Email Me This Job

Stinger Bridge & Iron, an AISC certified structural steel fabricator and PCI certified precast concrete girder fabricator and erection contractor. Stinger focuses primarily on the Southwestern Bridge and Highway market, specializing in bridge projects. Stinger fabricates in its Coolidge, Arizona facility located south of the Phoenix/Chandler/Gilbert area and erects work in Arizona, California, Nevada, New Mexico, Texas and Colorado. For additional information about our company visit our website at www.stingerbridgeandiron.com

POSITION SCOPE

We are seeking experienced CNC Machine Operators. Candidates must have CNC machine and or burn table experience. Experience with mastercam, and sigma nest, Pro Nest, Steel Projects, Fabtrol and CAD experience software plus. The CNC Machine Operator is a safety sensitive position and is based out of our Coolidge, AZ location.

PRIMARY DUTIES

+ List job duties

+ Other duties as assigned

BACKGROUND

+ List background or skills needed for position

+ Experience in bridge work, precast concrete, steel fabrication and erection is preferred. (SG)

Stinger Bridge & Iron is an Equal Employment Opportunity Employer and an Equal Opportunity Employer of Individuals with Disabilities and Protected Veterans.

Pre-employment physical and drug testing are required.

If you require an accommodation to submit an application, please email to request an accommodation. This email is only to request an accommodation to the application process and is not an email to inquire about the status of your application.

**PDS Tech, Inc. is seeking a Machinist Phoenix, AZ**

Skills/Behaviors * Basic knowledge of machining specifically aligning to Mills/Lathes/Grinders * Ability to read and interpret blueprints and interpretations of machining programs * Understanding of geometric tolerance measuring tools * Demonstrated ability to learn multiple disciplines Equipment * Center lap and straighten * Mills/Lathes/ OD and ID Grinders Education * High School Diploma

All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.

**PDS Tech, Inc. is seeking a Machinist in Phoenix, AZ**

**Summary:**

+ Assembles, repairs, and fabricates metal parts by operating mechanical equipment.

+ Assembles parts into sub-units or complete units.

+ Uses blueprints and design sketches to ensure the proper dimensions and tolerance levels of the finished product.

+ Relies on instructions and pre-established guidelines to perform the functions of the job.

+ Works under immediate supervision.

+ Primary job functions do not typically require exercising independent judgment.

+ Typically reports to a supervisor/manager.

**Prerequisites:**

+ Requires a high school diploma or its equivalent.

+ May be required to meet certain certifications in field and to have at least 2-4 years of experience.

+ Has knowledge of commonly-used concepts, practices, and procedures within a particular field.

All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.

**_CNC Programmer_**

**_Direct Hire_**

**_$90K-$100K_**

**_Phoenix, AZ_**

Our client is seeking a hands-on CNC Programmer for their manufacturing facility in Phoenix, AZ. Those with 5-10 years’ current MasterCAM programming for non-job shop environments is required. Strong knowledge in fabrication, working with multi-axis and specialty materials id required. Great company with the opportunity to work in a climate-controlled environment makes this an ideal position for those who want to take their skill to the next level.

Duties:

+ Strong analytical and problem-solving skills.

+ Ability to work effectively with others and independently.

+ Observe machines on trial runs or conduct simulations to ensure that programs and machinery will function properly and produce items that meet specifications.

+ Modify existing programs to enhance efficiency.

+ Take ownership of projects in a hands-on fashion- from programming to setting up, and running (train and mentor others the same).

+ Work with engineering to solve and modify design issues to meet or exceed OEM guidelines.

+ Start within two weeks- relocation candidates welcome to apply.

Requirements:

+ 5-10 years 5 Axis MasterCAM Programming is Required

+ Bachelor’s Degree in an Engineering related field is highly desired

+ 3-5 years recent Programming experience with Aerospace or Medical Device products for a manufacturer

+ Six Sigma Trained or hold a current designation is highly desired

+ Strong analytical skills, CMM knowledge, GD&T, reading blueprints are all required

+ Experience with exotic alloys and ceramics is highly desired

+ Ability to work with CAD/CAM such as Solidworks is also required

If this is you or know anyone who is interested please apply today or share this posting!!!

**Why Kelly** **®** **?**

Your engineering skills are in demand, but how do you find the right fit? Easy. With Kelly® Engineering, our experts connect you with leading organizations where you can learn and grow, collaborate on innovative projects, and keep your skills sharp with top technology. Whether you prefer the variety and flexibility of short-term projects, or are looking for something more long-term, we’re here every step of the way to find your dream engineering job.

**About Kelly** **®**

At Kelly, we’re always thinking about what’s next and advising job seekers on new ways of working to reach their full potential. In fact, we’re a leading advocate for temporary/non-traditional workstyles, because we believe they allow flexibility and tremendous growth opportunities that enable a better way to work and live. Connecting great people with great companies is what we do best, and our employment opportunities span a wide variety of workstyles, skill levels, and industries around the world.

Kelly is an equal opportunity employer committed to employing a diverse workforce and providing accommodations for people with disabilities in all parts of the hiring process as required under its Employment Accommodation Policy. Kelly will work with applicants to meet accommodation needs that are made known to Kelly in advance.